From f3928fb15fe10c50e365909e14ad66da0f56efcd Mon Sep 17 00:00:00 2001 From: Wynn Wolf Arbor Date: Wed, 10 Jun 2020 21:46:11 +0200 Subject: mail-filter/opendkim: Drop ebuild that has been merged upstream Package-Manager: Portage-2.3.99, Repoman-2.3.22 --- .../opendkim/files/opendkim-2.10.3-openrc.patch | 295 --------------------- 1 file changed, 295 deletions(-) delete mode 100644 mail-filter/opendkim/files/opendkim-2.10.3-openrc.patch (limited to 'mail-filter/opendkim/files/opendkim-2.10.3-openrc.patch') diff --git a/mail-filter/opendkim/files/opendkim-2.10.3-openrc.patch b/mail-filter/opendkim/files/opendkim-2.10.3-openrc.patch deleted file mode 100644 index b4700e3..0000000 --- a/mail-filter/opendkim/files/opendkim-2.10.3-openrc.patch +++ /dev/null @@ -1,295 +0,0 @@ -diff --git a/Makefile.am b/Makefile.am -index ee2d21ab..b085b988 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -39,6 +39,52 @@ DISTCLEANFILES = opendkim-@VERSION@.tar.gz - # though. - DISTCHECK_CONFIGURE_FLAGS=--enable-vbr --with-lua --enable-stats --with-odbx --with-db --with-openssl=/usr/local --enable-atps --enable-replace_rules - -+ -+# -+# Handle some scripts and configuration files that need @VARIABLE@ -+# replacements here, so that we can share the rules (which are -+# identical) between all of the targets. -+# -+ -+# We want to *build and install* these on the target machine. -+nodist_doc_DATA = contrib/OpenRC/opendkim.openrc \ -+ contrib/systemd/opendkim.service \ -+ contrib/systemd/opendkim.tmpfiles \ -+ opendkim/opendkim.conf.simple \ -+ opendkim/opendkim.conf.simple-verify -+ -+# Custom variable to keep the rule below as sane as possible. -+doc_DATA_intermediate = contrib/OpenRC/opendkim.openrc.in -+ -+# We want to *ship* these. -+EXTRA_DIST = contrib/OpenRC/opendkim.openrc.in.in \ -+ contrib/systemd/opendkim.service.in \ -+ contrib/systemd/opendkim.tmpfiles.in \ -+ opendkim/opendkim.conf.simple.in \ -+ opendkim/opendkim.conf.simple-verify.in -+ -+# The next rule allow us to replace bindir, libdir, etc. within -+# files. The example is taken from the autoconf documentation and can -+# be found in the "Installation Directory Variables" section. -+edit = sed -e 's|@DOMAIN[@]|$(DOMAIN)|g' \ -+ -e 's|@RUNSTATEDIR[@]|$(runstatedir)|g' \ -+ -e 's|@SBINDIR[@]|$(sbindir)|g' \ -+ -e 's|@SYSCONFDIR[@]|$(sysconfdir)|g' -+ -+# This rule includes EVERY source/intermediate file as a dependency of -+# EVERY output file, which is clearly wrong, but it may be the best we -+# can do without duplication. At least it's the right kind of wrong, -+# and rebuilds too often rather than not often enough. -+$(nodist_doc_DATA): $(doc_DATA_intermediate) $(EXTRA_DIST) Makefile -+ rm -f $@ $@.tmp -+ srcdir=''; \ -+ test -f ./$@.in || srcdir=$(srcdir)/; \ -+ $(edit) $${srcdir}$@.in > $@.tmp -+ mv $@.tmp $@ -+ -+ -+ -+ - $(DIST_ARCHIVES): distcheck - - $(DIST_ARCHIVES).md5: $(DIST_ARCHIVES) -diff --git a/configure.ac b/configure.ac -index 76914fd9..a478bb83 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -65,6 +65,9 @@ AC_PROG_CC_C99 - AM_PROG_CC_C_O - AC_PROG_LIBTOOL - -+# Used by the OpenRC service script, at least. -+AC_PROG_GREP -+ - PKG_PROG_PKG_CONFIG - - # -@@ -2628,6 +2631,11 @@ AC_SUBST(SPECCONFIGURE) - AC_SUBST(SPECREQUIRES) - AC_SUBST(SPECBUILDREQUIRES) - -+# Autoconf 2.70 will support this, and many distros patch it in, -+# but Autoconf 2.70 hasn't actually been released yet. -+AS_IF([test -z "${runstatedir}"], [runstatedir='${localstatedir}/run']) -+AC_SUBST([runstatedir]) -+ - # - # Finish up - # -@@ -2639,6 +2647,7 @@ AC_OUTPUT([ Makefile - contrib/docs/Makefile - contrib/init/Makefile - contrib/init/generic/Makefile -+ contrib/OpenRC/opendkim.openrc.in - contrib/init/redhat/Makefile - contrib/init/redhat/opendkim - contrib/init/redhat/opendkim-default-keygen -@@ -2650,8 +2659,6 @@ AC_OUTPUT([ Makefile - contrib/spec/Makefile - contrib/spec/opendkim.spec - contrib/stats/Makefile -- contrib/systemd/Makefile -- contrib/systemd/opendkim.service - libopendkim/opendkim.pc libopendkim/Makefile - libopendkim/docs/Makefile - libopendkim/tests/Makefile -@@ -2664,8 +2671,6 @@ AC_OUTPUT([ Makefile - opendkim/opendkim-lua.3 - opendkim/opendkim-testkey.8 opendkim/opendkim-stats.8 - opendkim/opendkim-testmsg.8 opendkim/opendkim.conf.5 -- opendkim/opendkim.conf.simple -- opendkim/opendkim.conf.simple-verify - opendkim/opendkim-atpszone.8 opendkim/opendkim-spam.1 - opendkim/tests/Makefile - stats/Makefile stats/opendkim-importstats.8 -diff --git a/contrib/Makefile.am b/contrib/Makefile.am -index 76df01cd..401130bb 100644 ---- a/contrib/Makefile.am -+++ b/contrib/Makefile.am -@@ -3,6 +3,6 @@ - - #AUTOMAKE_OPTIONS = foreign - --SUBDIRS = convert docs init ldap lua patches repute spec stats systemd -+SUBDIRS = convert docs init ldap lua patches repute spec stats - - dist_doc_DATA = README -diff --git a/contrib/OpenRC/opendkim.openrc.in.in b/contrib/OpenRC/opendkim.openrc.in.in -new file mode 100644 -index 00000000..4b783615 ---- /dev/null -+++ b/contrib/OpenRC/opendkim.openrc.in.in -@@ -0,0 +1,54 @@ -+#!/sbin/openrc-run -+# Copyright 1999-2019 Gentoo Authors -+# Distributed under the terms of the GNU General Public License v2 -+ -+CONFFILE="@SYSCONFDIR@/${RC_SVCNAME}.conf" -+required_files="${CONFFILE}" -+ -+command="@SBINDIR@/opendkim" -+pidfile="@RUNSTATEDIR@/${RC_SVCNAME}.pid" -+command_args="-P ${pidfile} -x ${CONFFILE}" -+extra_commands="checkconfig" -+ -+depend() { -+ use dns logger net -+ before mta -+} -+ -+checkconfig() { -+ # -+ # The opendkim.conf man page says, -+ # -+ # For parameters that are Boolean in nature, only the first byte -+ # of the value is processed... For negative values, the following -+ # are accepted: "F", "f", "N", "n", "0".' -+ # -+ if @GREP@ '^[[:space:]]*Background[[:space:]]\+[FfNn0]' "${CONFFILE}" \ -+ >/dev/null 2>&1; then -+ eend 1 "${RC_SVCNAME} cannot run in the foreground!" -+ fi -+ if ! "${command}" -n "${command_args}"; then -+ eend 1 "${RC_SVCNAME} configuration check failed" -+ fi -+} -+ -+start_pre() { -+ # If this isn't a restart, make sure that the user's config isn't -+ # busted before we try to start the daemon (this will produce -+ # better error messages than if we just try to start it blindly). -+ # -+ # If, on the other hand, this *is* a restart, then the stop_pre -+ # action will have ensured that the config is usable and we don't -+ # need to do that again. -+ if [ "${RC_CMD}" != "restart" ]; then -+ checkconfig || return $? -+ fi -+} -+ -+stop_pre() { -+ # If this is a restart, check to make sure the user's config -+ # isn't busted before we stop the running daemon. -+ if [ "${RC_CMD}" = "restart" ]; then -+ checkconfig || return $? -+ fi -+} -diff --git a/contrib/systemd/Makefile.am b/contrib/systemd/Makefile.am -deleted file mode 100644 -index 2ffc88cc..00000000 ---- a/contrib/systemd/Makefile.am -+++ /dev/null -@@ -1,3 +0,0 @@ --# Copyright (c) 2013, The Trusted Domain Project. All rights reserved. -- --dist_doc_DATA = opendkim.service -diff --git a/contrib/systemd/opendkim.service.in b/contrib/systemd/opendkim.service.in -index f7665f43..236f8a06 100644 ---- a/contrib/systemd/opendkim.service.in -+++ b/contrib/systemd/opendkim.service.in -@@ -1,20 +1,28 @@ --# If you are using OpenDKIM with SQL datasets it might be necessary to start OpenDKIM after the database servers. --# For example, if using both MariaDB and PostgreSQL, change "After=" in the "[Unit]" section to: --# After=network.target nss-lookup.target syslog.target mariadb.service postgresql.service -+# If you are using OpenDKIM with SQL datasets, you should start -+# OpenDKIM after your database server. For example, when using -+# PostgreSQL, you should create a supplementary ".conf" file in the -+# appropriate directory containing, -+# -+# [Unit] -+# After=postgresql.service -+# - - [Unit] - Description=DomainKeys Identified Mail (DKIM) Milter --Documentation=man:opendkim(8) man:opendkim.conf(5) man:opendkim-genkey(8) man:opendkim-genzone(8) man:opendkim-testadsp(8) man:opendkim-testkey http://www.opendkim.org/docs.html -+Documentation=man:opendkim(8) \ -+ man:opendkim.conf(5) \ -+ man:opendkim-genkey(8) \ -+ man:opendkim-genzone(8) \ -+ man:opendkim-testkey(8) \ -+ http://www.opendkim.org/docs.html - After=network.target nss-lookup.target syslog.target - - [Service] - Type=forking --PIDFile=@localstatedir@/run/opendkim/opendkim.pid --EnvironmentFile=-@sysconfdir@/sysconfig/opendkim --ExecStart=@sbindir@/opendkim $OPTIONS -+ExecStart=@SBINDIR@/opendkim -P @RUNSTATEDIR@/opendkim.pid -+ExecStartPre=@SBINDIR@/opendkim -P @RUNSTATEDIR@/opendkim.pid -n -f - ExecReload=/bin/kill -USR1 $MAINPID --User=opendkim --Group=opendkim -+PIDFile=@RUNSTATEDIR@/opendkim.pid - - [Install] - WantedBy=multi-user.target -diff --git a/contrib/systemd/opendkim.tmpfiles.in b/contrib/systemd/opendkim.tmpfiles.in -new file mode 100644 -index 00000000..a9118974 ---- /dev/null -+++ b/contrib/systemd/opendkim.tmpfiles.in -@@ -0,0 +1,5 @@ -+# We allow everyone to read/traverse this directory because if it -+# contains a local socket, then (for example) your MTA will want to -+# look in there. Permissions on the socket itself are controlled -+# by the "UserID" and "UMask" directives in the daemon's configuration. -+d @RUNSTATEDIR@/opendkim 0755 opendkim opendkim -diff --git a/opendkim/Makefile.am b/opendkim/Makefile.am -index 4aa615c1..7d514771 100644 ---- a/opendkim/Makefile.am -+++ b/opendkim/Makefile.am -@@ -16,9 +16,11 @@ endif - sbin_PROGRAMS += opendkim-stats - endif - -+ - dist_sbin_SCRIPTS = opendkim-genkey --dist_doc_DATA = opendkim.conf.sample opendkim.conf.simple \ -- opendkim.conf.simple-verify README.SQL -+ -+dist_doc_DATA = opendkim.conf.sample README.SQL -+ - - if BUILD_FILTER - sbin_PROGRAMS += opendkim -diff --git a/opendkim/opendkim.conf.simple-verify.in b/opendkim/opendkim.conf.simple-verify.in -index 2224b64f..463048ab 100644 ---- a/opendkim/opendkim.conf.simple-verify.in -+++ b/opendkim/opendkim.conf.simple-verify.in -@@ -17,5 +17,5 @@ Mode v - - # ADSPDiscard no - --# PidFile /var/run/opendkim/opendkim.pid -+# PidFile @RUNSTATEDIR@/opendkim.pid - -diff --git a/opendkim/opendkim.conf.simple.in b/opendkim/opendkim.conf.simple.in -index 735b924b..b70bfb46 100644 ---- a/opendkim/opendkim.conf.simple.in -+++ b/opendkim/opendkim.conf.simple.in -@@ -12,6 +12,12 @@ KeyFile /var/db/dkim/@DOMAIN@.private - - Socket inet:8891@localhost - -+# To use a local socket instead, specify a path here. The "standard" -+# location is under @RUNSTATEDIR@/opendkim, and it's best to agree -+# on that directory so that various init systems can configure its -+# permissions and ownership automatically. -+#Socket local:@RUNSTATEDIR@/opendkim/opendkim.sock -+ - ReportAddress postmaster@@DOMAIN@ - SendReports yes - -@@ -25,4 +31,4 @@ SendReports yes - # - # PeerList X.X.X.X - --# PidFile /var/run/opendkim/opendkim.pid -+# PidFile @RUNSTATEDIR@/opendkim.pid -- cgit v1.2.3-2-gb3c3