aboutsummaryrefslogtreecommitdiffstats
path: root/group.c (unfollow)
Commit message (Collapse)AuthorLines
2013-04-08consistencyokan-1/+2
2013-04-05zap stray whitespaceokan-2/+2
2013-01-13put back r1.68 which allows an empty group to be sticky; behaviorokan-2/+6
change noticed by Thomas Pfaff and diagnosis why we need to group_setactive in this case by Alexander Polakov. replace XXX with a useful comment.
2013-01-10set the initial group to '1', missed by recent off-by-one groupokan-2/+2
numbering re-work; discovered the hard way by sthen@. ok sthen@
2013-01-01after we toggle a group hidden, it makes no sense to set it as activeokan-6/+2
(in sticky or non-stick mode), regardless of existing clients assigned to that group; oga marked this bit XXX in -r1.34 for it didn't seem make sense then either. pulled from a diff from from Alexander Polakov.
2013-01-01make num of groups no longer off-by-one; from Alexander Polakovokan-6/+6
note that a re-exec of cwm will not rewrite the group number atom of *existing* clients, so they will remain off-by-one until each client has its atom updated, or of course a restart of X.
2012-12-17replace client highlight with a client flagokan-7/+5
2012-12-17create and use menuq_clear() helper; from Tiago Cunhaokan-5/+2
2012-11-29specific last match for autogroup; few iterations with Kent Spillner.okan-7/+9
2012-11-09sortokan-2/+2
2012-11-08fix some warnings; inspired by a diff from Thordur Bjornsson.okan-3/+3
2012-11-07get rid of the xfree() wrapper around free(); from Tiago Cunha.okan-4/+4
2012-09-09replace with xu_getprop wrapper used everywhere else.okan-13/+7
2012-07-08remove a redundant assignment and another one up.okan-3/+2
2012-07-03re-implement atom handing; makes for a normalized and more consistentokan-39/+18
separation between cwm and ewmh. seen by a few.
2012-05-16get rid of more stray lines/spacesokan-3/+3
2012-05-16fix commentokan-3/+4
2011-12-29check if we're in the group already, else multiple calls tookan-2/+4
group_movetogroup() on one client will still increment nhidden if the group is hidden. found the hard way by Thomas Jeunet and fix from Alexander Polakov - thanks to both! ok oga@
2011-10-12use xfree instead of free since strings is allocated with xmalloc; fromokan-2/+2
dhill ok oga@
2011-09-19move client to group (movetogroup) and hide client only if group isokan-2/+6
already hidden (suggested behavior from Alexander Polakov). ok sthen oga
2011-09-13repair groupcycle (broke after cycle-in-group support added more flags);okan-6/+6
found by and fix from Thomas Pfaff. ok oga@
2011-07-25We are inconsistent when it comes to function returns, so just go allokan-4/+4
the way with the cwm specific parts. ok oga@
2011-05-11tag and comment cleanup; ok oga@okan-1/+1
2011-02-13we lose track of highstack somewhere, so recompute it before we need it.tedu-1/+6
fixes a crash reported by christian neukirchen. ok okan
2010-09-25spacing nitsokan-1/+2
2010-09-25more clear variable name so than name/class shouldn't be confused again.okan-5/+5
ok oga@
2010-07-30revert -r1.45 of group.c (log was: fix window name and class to matchokan-3/+4
cwmrc(5)). instead, fix cwmrc(5) to match the old behavior which also happens to match the example config, of which many have based their configs; this also nicely matches the output of xprop(1). clean-up of variable names as a separate commit. suggested by sthen (and something we should have done initially). discussed with and ok oga@
2010-06-28fix window name and class to match cwmrc(5); from Holger Mikolon - thanks!okan-4/+3
ok oga@
2010-04-11clean up a few xu_* functions to just accept what they need (Window).okan-2/+2
ok oga@
2009-12-15pull all non-X11 headers from calmwm.h and place them only where theyokan-1/+10
are required. encourged to go all the way by oga@
2009-12-15spacingokan-4/+2
2009-12-15pull these headers only into files that need them.okan-1/+3
ok oga@
2009-12-15merge the 2 common header files; specific includes to be pulled out asokan-2/+1
separate commits. ok oga@
2009-12-14kill _CWM_GRP atom setting. The netwm stuff does us well enough now thatoga-17/+2
it's superfluous. ok okan@
2009-12-11implement support for _NET_WM_DESKTOP properties on windows.oga-7/+26
it works kinda like _CWM_GRP, which we added to aid restarts a while ago, but it's standardised and clients are specifically allowed to set it to request a desktop. for noe we leave _CWM_GRP support in, but its days are now numbered. while i'm here fixup an int/long mixup with an earlier diff. ok okan@
2009-12-11Implement _NET_DESKTOP_NAMES, this one was a bit tricky since thespecoga-10/+117
says that a pager can change the property at any time (most need a clientmessage). So deal with property updates. Needed to shuffle some of the other code around since we can't just use shortcut_to_name[] everywhere now. ok okan@
2009-12-10Implement _NET_VIRTUAL_ROOTS (just clear it, we don't use that technique)oga-2/+15
and _NET_SHOWING_DESKTOP (we're never doing so right now). only three informational root-window hints to go. ok okan@
2009-12-10Implement _NET_CURRENT_DESKTOP, _NET_DESKTOP_VIEWPORT andoga-8/+21
_NET_DESKTOP_GEOMETRY. ok okan@
2009-12-10finish unfucking the screen_ctx handling.oga-51/+55
remove screen_current() it was utterly bogus when nscreens > 1. pass a fake client_ctx in the case where there's no client and the kbfunc or mousefunc doesn't need a real one, it just contains the current screen, modify these functions so that they pass down the screen context to their callees. make groups per screen, it's the only way it makes sense in this regard. ok okan@.
2009-12-07Implement _NET_NUMBER_OF_DESKTOPS, currently this is statically 9 andoga-3/+1
unchangable. the group code needs some cleaning up before this will be a bit less hackish. ok okan@
2009-06-20compact a bit by condensing a few if-else's; from Thomas Pfaffokan-9/+3
"go on then" oga@
2009-06-20unroll XCALLOC/XMALLOC macros; since we use xcalloc/xmalloc all over theokan-2/+2
place anyway, this makes things a bit more consistent; from Thomas Pfaff ok oga@
2009-05-19In movetogroup, check the window's current group and skip client_hide()sthen-2/+3
if it's the same as the active group. Was in my original movetogroup diff, but it got simplified a little too far. ok oga@
2009-05-18nuke the leading underscore notation for local static functions - thereokan-30/+30
are far better ways to know. "go for it" oga@
2009-05-17a long time coming - re-work the way we deal with colors: since we'reokan-3/+3
using Xft(3), use it to select the font color as well instead of trying to build one; properly allocate and free colors at-will, e.g. we now have configurable colors. feedback and ok's todd@ and oga@
2009-05-17minor bit of knf, just to be consistent; oga@ doesn't mind that muchokan-4/+3
2009-05-17unbreakokan-1/+2
2009-05-17add a "movetogroup" function, which hides the current window fromsthen-2/+11
display and moves it to another group. useful with the recently added "grouponly" function, giving the ability to use groups as simple virtual desktops (similar to e.g. xmonad, dwm and scrotwm). this doesn't have default keyboard bindings; cwmrc(5) now shows how you could use these functions (use M-1...9 for grouponly1...9 and MS-1...9 for movetogroup1...9 to emulate the default dwm bindings). ok oga@
2009-05-14Add a new command (currently no default keybindings for it), grouponly[1-9].oga-1/+18
This works like the group select binding, but hides all other groups. So, the people who've been complaining that they don't get "virtual desktops" in cwm may want to try this out in cwmrc (from memory, untested): --- #cwmrc # add new windows to the current group set sticky # automatically sticky windows. xclock for now. # to make more windows sticky use group_toggle to unset their group autogroup 0 xclock # make the group selection keys hide other groups, emulate virtual desktops bind CM-1 grouponly1 bind CM-2 grouponly2 bind CM-3 grouponly3 bind CM-4 grouponly4 bind CM-5 grouponly5 bind CM-6 grouponly6 bind CM-7 grouponly7 bind CM-8 grouponly8 bind CM-9 grouponly9 --- mostly by sthen, tweaks from me. ok todd@, "if it works i'm ok with it" okan@, ok sthen@
2009-01-27One of the most annoying things to do was restart cwm and lose all ofoga-7/+22
your group state. Fix this up by using an X Atom (_CWM_GRP) to store the name of the group that we're using (the name, not the number is because at one point we may make the group numbers dynamic). I've been talking about this since c2k8. so CM-w means you keep all of your windows grouped properly. ok okan@, todd@
powered by cgit and git | oriole.systems | how to verify signatures