| Commit message (Collapse) | Author | Lines |
|---|
|
All cgit_xxx_link functions take const char* for the 'name' parameter,
except for cgit_commit_link, which takes a char* and subsequently
modifies the contents. Avoiding the content changes, and making it
const char* will avoid the need to make copies of const char* strings
being passed to cgit_commit_link.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: John Keeping <john@keeping.me.uk>
|
|
The ui-blame code will also need to call set_title_from_path, so go
ahead and move it to ui-shared.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: John Keeping <john@keeping.me.uk>
|
|
When composing snapshot file names for a tag with a prefix of the form
v[0-9] (resp. V[0-9]), the leading "v" (resp. "V") is stripped. This
leads to conflicts if a tag with the stripped name already exists or if
there are tags only differing in the capitalization of the leading "v".
Make sure we do not strip the "v" in these cases.
Reported-by: Juuso Lapinlampi <wub@partyvan.eu>
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
|
|
Git's DATE_STRFTIME ignores the timezone argument and just uses the
local timezone regardless of whether the "local" flag is set.
Since our existing FMT_LONGDATE and FMT_SHORTDATE are pretty-much
perfect matches to DATE_ISO8601 and DATE_SHORT, switch to taking a
date_mode_type directly in cgit_date_mode().
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
There are no longer any users of this function.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This affects the tooltip showing the full time and the case when a date
is sufficiently old to be shown in full rather than as an offset.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This returns the correct mode value for use with Git's show_date() based
on the current CGit configuration and will be used in the following
patches.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
We never use any format other than FMT_SHORTDATE, so move that into the
function.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Signed-off-by: Peter Colberg <peter@colberg.org>
|
|
Signed-off-by: Christian Hesse <mail@eworm.de>
|
|
Signed-off-by: Christian Hesse <mail@eworm.de>
|
|
These will avoid needing to call three functions to start page layout in
subsequent patches when we move the layout setup into each individual
page.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This will allow us to generate error responses with the correct HTTP
response code without needing all of the layout boilerplate.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Follow the Git policy of including system headers in only one place.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Teach the "log" UI to behave in the same way as "git log --follow", when
given a suitable instruction by the user. The default behaviour remains
to show the log without following renames, but the follow behaviour can
be activated by following a link in the page header.
Follow is not the default because outputting merges in follow mode is
tricky ("git log --follow" will not show merges). We also disable the
graph in follow mode because the commit graph is not simplified so we
end up with frequent gaps in the graph and many lines that do not
connect with any commits we're actually showing.
We also teach the "diff" and "commit" UIs to respect the follow flag on
URLs, causing the single-file version of these UIs to detect renames.
This feature is needed only for commits that rename the path we're
interested in.
For commits before the file has been renamed (i.e. that appear later in
the log list) we change the file path in the links from the log to point
to the old name; this means that links to commits always limit by the
path known to that commit. If we didn't do this we would need to walk
down the log diff'ing every commit whenever we want to show a commit.
The drawback is that the "Log" link in the top bar of such a page links
to the log limited by the old name, so it will only show pre-rename
commits. I consider this a reasonable trade-off since the "Back" button
still works and the log matches the path displayed in the top bar.
Since following renames requires running diff on every commit we
consider, I've added a knob to the configuration file to globally
enable/disable this feature. Note that we may consider a large number
of commits the revision walking machinery no longer performs any path
limitation so we have to examine every commit until we find a page full
of commits that affect the target path or something related to it.
Suggested-by: René Neumann <necoro@necoro.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Otherwise we can't easily embed links to other /about/ pages.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
|
|
|
|
When clicking on "log" from a tag we end up showing the log of whatever
branch we used to reach the tag. If the tag doesn't point onto a branch
then the tagged commit won't appear in this output.
By linking to tags with the head parameter instead of the "id" parameter
the log link will show the log of the tag. This is clearly desirable
when the tag has been reached from the refs UI and changing the
behaviour for tag decorations makes them match branch decorations where
log -> decoration -> log shows the log of the decoration.
Reported-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This will allow us to reuse the same logic to add clone URL <link/>
elements to the header of all repo-specific pages in order to support
the rel-vcs microformat.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This argument is never used with a value other than zero, so remove it
and simplify the code.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This argument is never used with a value other than zero, so remove it
and simplify the code.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Drop the context parameter from the following functions (and all static
helpers used by them) and use the global context instead:
* cgit_print_http_headers()
* cgit_print_docstart()
* cgit_print_pageheader()
Remove context parameter from all commands
Drop the context parameter from the following functions (and all static
helpers used by them) and use the global context instead:
* cgit_get_cmd()
* All cgit command functions.
* cgit_clone_info()
* cgit_clone_objects()
* cgit_clone_head()
* cgit_print_plain()
* cgit_show_stats()
In initialization routines, use the global context variable instead of
passing a pointer around locally.
Remove callback data parameter for cache slots
This is no longer needed since the context is always read from the
global context variable.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
|
|
This way we're sure to use virtual root, or any other strangeness
encountered.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Remove filepair_cb_raw() and all related functions. These are no longer
needed. We now use Git's internal functions for raw diff formatting
everywhere.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
|
|
Move filepair_cb() from ui-patch.c to ui-shared.c and rename it to
filepair_cb_raw(). This callback will be used in ui-diff.c in a
follow-up patch.
Note that it is not straightforward to extract filepair_cb() from
ui-diff.c which is why it is not done here as well.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
|
|
This removes many uses of "fmt" which uses a fixed size static pool of
fixed size buffers. Instead of relying on these, we now pass around
argument lists for as long as possible before using a strbuf to render
content of an arbitrary size.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
While doing this, remove declarations from header files where the
corresponding definition is declared "static" in order to avoid build
errors.
Also re-order existing headers in ui-*.c so that the file-specific
header always comes immediately after "cgit.h", helping with future
consistency.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
The return values of these functions are essentially constant and should
never be modified.
Note that this will introduce a compiler warning when we try to free the
return value of any of these functions. However, given that all of these
currently return statically allocated strings in some cases, they need
to be refactored before this can be done anyway.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
|
|
When the repolist is paged, the page-links are missing the sort parameter,
causing the initial page to be custom sorted, but any clicked page will
then be with the default sort order again.
|
|
The current 'repo.module-link' option is sufficient when all gitlinks
in a repository can be converted to commit links in a uniform way, but
not when different submodules/paths needs different settings.
This patch adds support for 'repo.module-link.<path>', which will be
used for linking to submodules at paths matching one such entry.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This includes adding a path argument to cgit_commit_link() and updating all
its callers. The callers from within the commit page (i.e. the "commit",
"unidiff"/"side-by-side diff" and "parent" links) all preserve the path
limit of the current commit page. All other callers pass NULL (i.e. no path
limit).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Also indicate in the comment section of the patch that a path limit was
applied, too easily see when a generated patch is only partial.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When a path limit is in effect, and displayed directly beneath the tab bar,
it should offer breadcrumb navigation (like what the 'tree' page does), to
allow changing the path limit easily.
Implementing this requires a robust way to link back to the current page with
a changed ctx->qry.path, but without losing track of the other query
arguments. This is solved by adding the new cgit_self_link() function, which
is then invoked repeatedly by the new cgit_print_path_crumbs() function while
manipulating ctx->qry.path.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This is needed to prevent const-related warnings in later patches.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Geoff Johnstone <geoff.johnstone@googlemail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
A new config option side-by-side-diffs added, defaulting to 0,
meaning unidiff. Also a query option (ss) is used toggle this.
In the commit page you can switch between the two diff formats by
clicking on the link on the "commit"-row, to the right of (patch).
In the diff page you can switch by using the link at the start
of the page.
All commit-links and diff-links will remember the choice.
Signed-off-by: Ragnar Ouchterlony <ragnar@lysator.liu.se>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
|
|
This function will be reused by ui-stats.c in the next commit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Some users prefer to see the full message, so to make these users happy
the new querystring parameter "showmsg" can be used to print the full
commit message per log entry.
A link is provided in the log heading to make this function accessible,
and all links and forms tries to preserve the users preference.
Note: the new link is not displayed on the summary page since the point
of the summary page is to be a summary, but it is still obeyed if specified
manually.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This function can be used to generate properly escaped links to the tag
page.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This function can be used to generate a link to the summary page for the
currently active repo.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The urls for plain view makes it possible to download blobs without knowing
their SHA1, but the function needs to be promoted and the link from tree
view seems like a perfect fit.
PS: Although hidden, the blob view still is nice for direct blob access so
there's no point in removing it.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This enables a page which generates atom feeds for the current branch and
path, heavily inspired by the atom-support in gitweb.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When `local-time` is set, commit, tag and patch timestamps will be printed
in the servers timezone. Also, regardless of the value of `local-time`,
these timestamps will now always show the timezone.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This function will be used to build a pager in ui-repolist.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
It's a bit confusing to enter the patch view from the tab, since it has no
layout. And the commit view has always lacked showing the commit id. Both of
these warts are fixed by this commit, which adds a new header line in the
commit view which shows the commit id as a 'permalink' to the current commit
and also adds a link to the patch view of the current commit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This is finally a proper headerfile for the shared ui-functions which
used to reside in cgit.h
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
