summaryrefslogtreecommitdiffstatshomepage
path: root/ui-shared.c (follow)
Commit message (Collapse)AuthorAgeLines
...
* ui-shared: cache errors for "dynamic TTL"John Keeping2015-08-14-0/+1
| | | | | | | Most errors we generate are (potentially) transient, such as non-existent object IDs so we don't want them to be cached forever. Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: add cgit_print_layout_{start,end}()John Keeping2015-08-14-0/+12
| | | | | | | | These will avoid needing to call three functions to start page layout in subsequent patches when we move the layout setup into each individual page. Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: add cgit_print_error_page() functionJohn Keeping2015-08-14-0/+14
| | | | | | | This will allow us to generate error responses with the correct HTTP response code without needing all of the layout boilerplate. Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: show full date in tooltip if longer ago than max_relativeJohn Keeping2015-08-13-0/+4
| | | | | | | | | | | Commit caed6cb (ui-shared: show absolute time in tooltip for relative dates, 2014-12-20) added a toolip when we show a relative time. However, in some cases we show a short date (that is, the date but not the time) if an event was sufficiently far in the past and that commit did not update that case to add the same tooltip. Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: use common function in print_rel_date()John Keeping2015-08-13-10/+1
| | | | Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: extract date formatting to a functionJohn Keeping2015-08-13-4/+9
| | | | | | This will allow this code to be common with print_rel_date. Signed-off-by: John Keeping <john@keeping.me.uk>
* redirect: cleanlinessJason A. Donenfeld2015-08-13-2/+1
|
* log: allow users to follow a fileJohn Keeping2015-08-12-3/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Teach the "log" UI to behave in the same way as "git log --follow", when given a suitable instruction by the user. The default behaviour remains to show the log without following renames, but the follow behaviour can be activated by following a link in the page header. Follow is not the default because outputting merges in follow mode is tricky ("git log --follow" will not show merges). We also disable the graph in follow mode because the commit graph is not simplified so we end up with frequent gaps in the graph and many lines that do not connect with any commits we're actually showing. We also teach the "diff" and "commit" UIs to respect the follow flag on URLs, causing the single-file version of these UIs to detect renames. This feature is needed only for commits that rename the path we're interested in. For commits before the file has been renamed (i.e. that appear later in the log list) we change the file path in the links from the log to point to the old name; this means that links to commits always limit by the path known to that commit. If we didn't do this we would need to walk down the log diff'ing every commit whenever we want to show a commit. The drawback is that the "Log" link in the top bar of such a page links to the log limited by the old name, so it will only show pre-rename commits. I consider this a reasonable trade-off since the "Back" button still works and the log matches the path displayed in the top bar. Since following renames requires running diff on every commit we consider, I've added a knob to the configuration file to globally enable/disable this feature. Note that we may consider a large number of commits the revision walking machinery no longer performs any path limitation so we have to examine every commit until we find a page full of commits that affect the target path or something related to it. Suggested-by: René Neumann <necoro@necoro.eu> Signed-off-by: John Keeping <john@keeping.me.uk>
* about: always ensure page has a trailing slashJason A. Donenfeld2015-08-12-0/+8
| | | | | | Otherwise we can't easily embed links to other /about/ pages. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* git: update to v2.5.0Christian Hesse2015-08-12-1/+1
| | | | | | | | | | | | | | | Update to git version v2.5.0. * Upstream commit 5455ee0573a22bb793a7083d593ae1ace909cd4c (Merge branch 'bc/object-id') changed API: for_each_ref() callback functions were taught to name the objects not with "unsigned char sha1[20]" but with "struct object_id". * Upstream commit dcf692625ac569fefbe52269061230f4fde10e47 (path.c: make get_pathname() call sites return const char *) Signed-off-by: Christian Hesse <mail@eworm.de>
* ui-shared: allow remote refs in branch switcherChristian Hesse2015-03-18-0/+2
| | | | Signed-off-by: Christian Hesse <mail@eworm.de>
* Remove no-op link from submodule entriesLukas Fleischer2015-03-13-17/+24
| | | | | | | Instead of linking to the current page ("href='#'"), do not add a link to a submodule entry at all if the module-link setting is not used. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* ui-shared: currenturl should take into account leading slashJason A. Donenfeld2015-03-09-1/+5
|
* ui-shared: don't use an integer as a NULL pointerJohn Keeping2015-03-09-1/+1
| | | | Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: avoid initializing static variable to zeroJohn Keeping2015-03-09-1/+1
| | | | | | | | | Sparse complains that we are using a plain integer as a NULL pointer here, but in fact we do not have to specify a value for this variable at all since it has static storage duration and thus will be initialized to NULL by the compiler. Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: make cgit_doctype 'static'John Keeping2015-03-09-1/+1
| | | | | | This is not used outside this file and is not declared. Signed-off-by: John Keeping <john@keeping.me.uk>
* Avoid non-ANSI function declarationsJohn Keeping2015-03-09-6/+6
| | | | | | | | Sparse says things like: warning: non-ANSI function declaration of function 'calc_ttl' Signed-off-by: John Keeping <john@keeping.me.uk>
* Make root handling sane again.Jason A. Donenfeld2015-03-03-12/+12
|
* ui-shared: Add current url helper function.Jason A. Donenfeld2015-03-03-2/+9
|
* ui-shared: keep filter repolist page in paginationJason A. Donenfeld2015-03-03-3/+3
|
* ui-repolist: use ctx.qry.url instead of rooturl, in case we're filteringJason A. Donenfeld2015-03-03-1/+1
|
* ui-shared.c: Refactor add_clone_urls()Lukas Fleischer2015-02-05-22/+10
| | | | | | Make use of strbuf_split_str() and strbuf lists to split clone URLs. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* tag: reference with "h" instead of "id"John Keeping2015-01-19-4/+4
| | | | | | | | | | | | | | | When clicking on "log" from a tag we end up showing the log of whatever branch we used to reach the tag. If the tag doesn't point onto a branch then the tagged commit won't appear in this output. By linking to tags with the head parameter instead of the "id" parameter the log link will show the log of the tag. This is clearly desirable when the tag has been reached from the refs UI and changing the behaviour for tag decorations makes them match branch decorations where log -> decoration -> log shows the log of the decoration. Reported-by: Ferry Huberts <mailings@hupie.com> Signed-off-by: John Keeping <john@keeping.me.uk>
* footer: link back to cgit home pageJason A. Donenfeld2014-12-23-1/+1
| | | | | The footer has always been overrideable using the footer= in cgitrc, so this won't anger anybody who cares about their footer.
* ui-shared: show absolute time in tooltip for relative datesJohn Keeping2014-12-23-12/+23
| | | | Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: add rel-vcs microformat links to HTML headerJohn Keeping2014-12-23-0/+11
| | | | | | As described at https://joeyh.name/rfc/rel-vcs/. Signed-off-by: John Keeping <john@keeping.me.uk>
* Extract clone URL printing to ui-shared.cJohn Keeping2014-12-23-0/+37
| | | | | | | | This will allow us to reuse the same logic to add clone URL <link/> elements to the header of all repo-specific pages in order to support the rel-vcs microformat. Signed-off-by: John Keeping <john@keeping.me.uk>
* Change "ss" diff flag to an enumJohn Keeping2014-12-13-4/+4
| | | | | | | | | | | This will allow us to introduce a new "stat only" diff mode without needing an explosion of mutually incompatible flags. The old "ss" query parameter is still accepted in order to avoid breaking saved links, but we no longer generate any URIs using it; instead the new "dt" (diff type) parameter is used. Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: remove toggle_ssdiff arg to cgit_diff_link()John Keeping2014-12-13-4/+4
| | | | | | | This argument is never used with a value other than zero, so remove it and simplify the code. Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-shared: remove toggle_ssdiff arg to cgit_commit_link()John Keeping2014-12-13-6/+5
| | | | | | | This argument is never used with a value other than zero, so remove it and simplify the code. Signed-off-by: John Keeping <john@keeping.me.uk>
* git: update for git 2.0Christian Hesse2014-06-28-1/+1
| | | | | | | prefixcmp() and suffixcmp() have been remove, functionality is now provided by starts_with() and ends_with(). Retrurn values have been changed, so instead of just renaming we have to fix logic. Everything else looks just fine.
* ui-shared: do not allow negative minutesJason A. Donenfeld2014-01-17-0/+2
| | | | | | | Do to timestamp differences, sometimes cgit would should "-0 min", which doesn't make any sense. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ui-shared: move about tab all the way to the leftJason A. Donenfeld2014-01-17-4/+4
| | | | | | | | There were no objections (at the time of committing this): http://lists.zx2c4.com/pipermail/cgit/2013-May/001393.html http://lists.zx2c4.com/pipermail/cgit/2014-January/001904.html Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* Switch to exclusively using global ctxLukas Fleischer2014-01-17-152/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop the context parameter from the following functions (and all static helpers used by them) and use the global context instead: * cgit_print_http_headers() * cgit_print_docstart() * cgit_print_pageheader() Remove context parameter from all commands Drop the context parameter from the following functions (and all static helpers used by them) and use the global context instead: * cgit_get_cmd() * All cgit command functions. * cgit_clone_info() * cgit_clone_objects() * cgit_clone_head() * cgit_print_plain() * cgit_show_stats() In initialization routines, use the global context variable instead of passing a pointer around locally. Remove callback data parameter for cache slots This is no longer needed since the context is always read from the global context variable. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* auth: have cgit calculate login addressJason A. Donenfeld2014-01-16-0/+8
| | | | | | | This way we're sure to use virtual root, or any other strangeness encountered. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* auth: add basic authentication filter frameworkJason A. Donenfeld2014-01-16-12/+16
| | | | | | | | | | | | | | | | This leverages the new lua support. See filters/simple-authentication.lua for explaination of how this works. There is also additional documentation in cgitrc.5.txt. Though this is a cookie-based approach, cgit's caching mechanism is preserved for authenticated pages. Very plugable and extendable depending on user needs. The sample script uses an HMAC-SHA1 based cookie to store the currently logged in user, with an expiration date. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ui-shared: URL-escape script_nameJohn Keeping2014-01-12-2/+2
| | | | | | | | As far as I know, there is no requirement that $SCRIPT_NAME contain only URL-safe characters, so we need to make sure that any special characters are escaped. Signed-off-by: John Keeping <john@keeping.me.uk>
* Replace most uses of strncmp() with prefixcmp()Lukas Fleischer2014-01-10-1/+1
| | | | | | | This is a preparation for replacing all prefix checks with either strip_prefix() or starts_with() when Git 1.8.6 is released. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* Update copyright informationLukas Fleischer2014-01-08-1/+1
| | | | | | | | | * Name "cgit Development Team" as copyright holder to avoid listing every single developer. * Update copyright ranges. Signed-off-by: Lukas Fleischer <cgit@crytocrack.de>
* ui-shared: Drop filepair_cb_raw() and helperLukas Fleischer2013-09-14-72/+0
| | | | | | | | Remove filepair_cb_raw() and all related functions. These are no longer needed. We now use Git's internal functions for raw diff formatting everywhere. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* Extract filepair_cb from ui-patch.cLukas Fleischer2013-08-16-0/+72
| | | | | | | | | | | Move filepair_cb() from ui-patch.c to ui-shared.c and rename it to filepair_cb_raw(). This callback will be used in ui-diff.c in a follow-up patch. Note that it is not straightforward to extract filepair_cb() from ui-diff.c which is why it is not done here as well. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* readme: use string_list instead of space deliminationsJason A. Donenfeld2013-05-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Now this is possible in cgitrc - readme=:README.md readme=:readme.md readme=:README.mkd readme=:readme.mkd readme=:README.rst readme=:readme.rst readme=:README.html readme=:readme.html readme=:README.htm readme=:readme.htm readme=:README.txt readme=:readme.txt readme=:README readme=:readme readme=:INSTALL.txt readme=:install.txt readme=:INSTALL readme=:install Suggested-by: John Keeping <john@keeping.me.uk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* use struct strbuf instead of static buffersJohn Keeping2013-04-08-28/+35
| | | | | | | | | | | | | | | | | | | Use "struct strbuf" from Git to remove the limit on file path length. Notes on scan-tree: This is slightly involved since I decided to pass the strbuf into add_repo() and modify if whenever a new file name is required, which should avoid any extra allocations within that function. The pattern there is to append the filename, use it and then reset the buffer to its original length (retaining a trailing '/'). Notes on ui-snapshot: Since write_archive modifies the argv array passed to it we copy the argv_array values into a new array of char* and then free the original argv_array structure and the new array without worrying about what the values now look like. Signed-off-by: John Keeping <john@keeping.me.uk>
* Convert cgit_print_error to a variadic functionJohn Keeping2013-04-08-2/+13
| | | | | | | | | This removes many uses of "fmt" which uses a fixed size static pool of fixed size buffers. Instead of relying on these, we now pass around argument lists for as long as possible before using a strbuf to render content of an arbitrary size. Signed-off-by: John Keeping <john@keeping.me.uk>
* Fix out-of-bounds memory accesses with virtual_root=""John Keeping2013-04-08-9/+5
| | | | | | | | | | | | | | | | The CGit configuration variable virtual_root is normalized so that it does not have a trailing '/' character, but it is allowed to be empty (the empty string and NULL have different meanings here) and there is code that is insufficiently cautious when checking if it ends in a '/': if (virtual_root[strlen(virtual_root) - 1] != '/') Clearly this check is redundant, but rather than simply removing it we get a slight efficiency improvement by switching the normalization so that the virtual_root variable always ends in '/'. Do this with a new "ensure_end" helper. Signed-off-by: John Keeping <john@keeping.me.uk>
* Always #include corresponding .h in .c filesJohn Keeping2013-04-08-0/+1
| | | | | | | | | | | | While doing this, remove declarations from header files where the corresponding definition is declared "static" in order to avoid build errors. Also re-order existing headers in ui-*.c so that the file-specific header always comes immediately after "cgit.h", helping with future consistency. Signed-off-by: John Keeping <john@keeping.me.uk>
* Return const char * in cgit_{httpscheme, hosturl, rooturl}()Lukas Fleischer2013-04-08-4/+4
| | | | | | | | | | | | The return values of these functions are essentially constant and should never be modified. Note that this will introduce a compiler warning when we try to free the return value of any of these functions. However, given that all of these currently return statically allocated strings in some cases, they need to be refactored before this can be done anyway. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* ui-shared: squelch compiler warning.Jason A. Donenfeld2013-03-20-0/+1
| | | | | | Since tail is initialized to 0, we will never get a warning on the last if statement, but recent gcc complains anyway. So, we initialize len as well. Future gcc versions should be able to optimize this out anyway.
* Merge branch 'wip'Jason A. Donenfeld2013-03-20-57/+7
|\
| * cgit_print_snapshot_links(): Free prefix variableLukas Fleischer2013-03-04-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes following memory leak seen with "PATH_INFO=/cgit/commit/": ==16894== 12 bytes in 1 blocks are definitely lost in loss record 9 of 92 ==16894== at 0x4C2C04B: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) ==16894== by 0x56F2DF1: strdup (in /usr/lib/libc-2.17.so) ==16894== by 0x46CAC8: xstrdup (wrapper.c:35) ==16894== by 0x414E34: cgit_print_snapshot_links (ui-shared.c:926) ==16894== by 0x40CFA1: cgit_print_commit (ui-commit.c:102) ==16894== by 0x407B06: commit_fn (cmd.c:54) ==16894== by 0x405E16: process_request (cgit.c:574) ==16894== by 0x4074C8: cache_process (cache.c:322) ==16894== by 0x406C4F: main (cgit.c:872) Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
powered by cgit and git | oriole.systems | how to verify signatures