| Commit message (Collapse) | Author | Lines |
|---|
|
Currently the number of extra arguments is linked hard to the type of
the filter. This is also logical since it would be confusing to have
a different number of arguments for the same type of filter depending
on the context under which the filter is run (unless ofcourse one the
parameters would make the context clear, which is currently not the
case).
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Allow for per repo logo and logo-link; Use global logo and logo-link per
default.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Paths that start with a period ('.') are considered hidden in the Unix world.
scan_path() should arguably not recurse into these directories by default.
This patch makes it so, and introduces the "scan-hidden-path" config variable
for overriding the new default and revert to the old behaviour (scanning _all_
directories, including hidden .directories).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <larsh@prediktor.no>
|
|
Teach CGit to print an ASCII art commit graph to the left of the commit
message, similar to 'git log --graph'. The graph adds extra lines (table
rows) to the log when needed to add/remove/shuffle edges in the graph.
When 'showmsg' is enabled, the graph is automatically padded to account
for the extra lines added by the commit message/notes.
This feature is controlled by a new config variable: "enable-commit-graph"
(disabled by default), and individual repos can control it by setting
"repo.enable-commit-graph".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When using ui-log with path limits, the listing of commits enables parent
rewriting in Git's internal log machinery. This did not work well together
with cgit_diff_commit() which is used to generate the filecount and
linecount numbers for each commit in the log view. cgit_diff_commit() would
operate without any path limits, and would therefore process the full diff
between the commits shown (which, because of parent rewriting, is not the
same as processing the diff for the commit itself). Additionally, the bottom
commit in the log view would (again, because of parent rewriting) have zero
parents, causing us to process the entire diff between the empty tree and
that commit. Since path limits were not in effect, this would (in large
projects) reports thousands of files and millions of lines changed in that
bottom commit.
This patch fixes the issue by applying the same path limit to
cgit_diff_commit() as is applied to the rest of the log view. The result is
that the filecount/linecount now only reflects the diff as it pertains to
the given path limit.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This option is used to specify a filename which needs to be present in
the repositories found during `scan-path` processing. By setting this
option to 'git-daemon-export-ok', only repositories explicitly marked
for git daemon export will be included in the cgit configuration.
Signed-off-by: Felix Hanley <felix@seconddrawer.com.au>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Use "__attribute__((format (printf,N,M)))", as is done in git, do catch
mistakes in printf-style format strings.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
|
|
This option can be used to autogenerate section names during scan-path
processing.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The value of this option is used as the default value for repo.readme.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Jeff Smith <whydoubt@yahoo.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When this option is enabled (which it is by default), cgit will lookup
the 'gitweb.owner' setting in each git config file found when processing
the 'scan-path' option.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When this option is enabled, the '.git' suffix of repository directories
found while processing the 'scan-path' option will be removed.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This option specifies the location of a projectlist file as used by
gitweb - when 'scan-tree' is later specified, only the projects listed in
the projectlist file will be added.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The new ctx.qry.ignorews variable is passed via cgit_diff_files() and
cgit_diff_tree() to Git's diff machinery. This is equivalent to passing
--ignore-all-space to 'git diff'.
Signed-off-by: Johan Herland <johan@herland.net>
|
|
The new ctx.qry.context variable is picked up by cgit_print_diff(), and
passed via cgit_diff_files() to Git's diff machinery.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
For many commands/pages (e.g. 'tree', 'diff', 'plain', etc.), the
ctx.qry.path argument is interpreted as a path within the "virtual" project
directory structure. However, for some other commands (notably 'refs', and
the clone-related commands) ctx.qry.path is used in a different context (as
a more or less "real" path within the '.git' directory).
This patch differentiates between these two usages of ctx.qry.path, by
introducing a new variable - ctx.qry.vpath - which is equal to ctx.qry.path
in the former case, and NULL in the latter.
This will become useful in future patches when we want various pages and the
links between them to preserve existing in-project paths.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This allows one to specify the items in the RSS feeds
Signed-off-by: Aaron Griffin <agriffin@datalogics.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Displays all items from all branches in one feed
Signed-off-by: Aaron Griffin <agriffin@datalogics.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This patch teaches cgit to expand environment variables in certain
cgitrc option values (cache_root, scan-path, include) plus when
finding the location of cgitrc itself.
One use case for this feature is virtual hosting - e.g. by setting
$CGIT_CONFIG='/etc/cgitrc/$HTTP_HOST' in httpd.conf, all virtual
hosts automatically gets their own cgitrc.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The new option 'enable-subject-links' must be used to enable the verbose
parent-links in commit view.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Sometimes it is not feasible to generate the HTML pretty-print for large
files, especially if a source-filter is involved or binary data is to be
displayed. The "max-blob-size" config var allows to disable HTML output
for blobs bigger than X KBytes. Plain downloads are not affected.
Signed-off-by: Georg Lukas <georg@op-co.de>
|
|
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
A new config option side-by-side-diffs added, defaulting to 0,
meaning unidiff. Also a query option (ss) is used toggle this.
In the commit page you can switch between the two diff formats by
clicking on the link on the "commit"-row, to the right of (patch).
In the diff page you can switch by using the link at the start
of the page.
All commit-links and diff-links will remember the choice.
Signed-off-by: Ragnar Ouchterlony <ragnar@lysator.liu.se>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This option must be enabled if repo-specific cgitrc files should be
allowed to override any of the 'filter' options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When recursively scanning a directory tree looking for git repositories,
cgit will now parse cgitrc files found within such repositories.
The repo-specific config files can include any repo-specific options
except 'repo.url' and 'repo.path'. Also, in such config files the 'repo.'
prefix can not be used, i.e. the valid options then becomes:
* name
* clone-url
* desc
* ower
* defbranch
* snapshots
* enable-log-filecount
* enable-log-linecount
* max-stats
* module-link
* section
* about-filter
* commit-filter
* source-filter
* readme
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The 'repo.' prefix should be reserved for repo-specific options, but
the option 'repo.group' must still be honored to stay backwards
compatible.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This makes the name of the cgitrc option more descriptive and at the
same time changes the default from "0" to "1" in an attempt to stay
backwards compatible - prior to the introduction of "source-filter"
and "linenumbers", cgit always generated linenumber links in the
tree view, but now this feature can be turned off (one might want to
do this if the source-filter performs line-wrapping etc).
While at it, the documentation is updated to match the surrounding
descriptions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Florian Pritz <bluewind@xssn.at>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This function is used to read the full content of a textfile into a
newly allocated buffer (with zerotermination).
It replaces the earlier readfile() in scan-tree.c (which was rather
error-prone[1]), and is reused by read_agefile() in ui-repolist.c.
1: No checks for EINTR and EAGAIN, fixed-size buffer
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
cgit_print_http_headers() used to do nothing if 'embedded' was
specified in cgitrc, but that was wrong - we never want to skip the
headers when invoked as a CGI app. Sadly, there's no easy way to
detect if we're invoked as a CGI app or if we're invoked by another
CGI app, so for the latter case cgit needs to be invoked with either
--nohttp on the command line or NO_HTTP=1 in the environment.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
These options can be used to execute a filter command on each about-page,
both top-level and for each repository (repo.about-filter can be used
to override the current about-filter).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
These options can be used to override the default commit- and source-
filter settings per repository.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Martin Szulecki <opensuse@sukimashita.com>
|
|
This new option specifies a filter which is executed on the commit
message, i.e. the commit message is written to the filters STDIN and
the filters STDOUT is included verbatim as the commit message.
This can be used to implement commit linking by creating a simple
shell script in e.g. /usr/bin/cgit-commit-filter.sh like this:
#/bin/sh
sed -re 's|\b([0-9a-fA-F]{6,40})\b|<a href="./?id=\1">\1</a>|g'
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This new option is used to specify an external command which will be
executed when displaying blob content in the tree view. Blob content
will be written to STDIN of the filter and STDOUT from the filter
will be included verbatim in the html output from cgit. The file name
of the blob will be passed as the only argument to the filter command.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The functions cgit_open_filter() and cgit_close_filter() can be used to
execute filters on the output stream from cgit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This patch makes it possible to register mappings from filename
extension to mime type in cgitrc and use this mapping when returning
blob content in `plain` view.
The reason for adding this mapping to cgitrc (as opposed to parsing
something like /etc/mime.types) is to allow quick lookup of a limited
number of filename extensions (/etc/mime-types on my machine currently
contains over 700 entries).
NB: A nice addition to this patch would be to parse /etc/mime.types
when `plain` view is requested for a file with an extension for which
there is no mapping registered in cgitrc.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This option can be used to disable the standard cgit page header, which
might be useful in combination with the 'embedded' option.
Suggested-by: Mark Constable <markc@renta.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This patch adds an option to the configuration file, "head-include",
which works just like "header" or "footer", except the content is put
into the HTML's <head> tag.
|
|
When downloading a blob identified by its path, the client might want
to know if the blob has been modified since a previous download of the
same path. To this end, an ETag containing the blob SHA1 seems to be
ideal.
Todo: add support for HEAD requests...
Suggested-by: Owen Taylor <otaylor@redhat.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When activated, cgit will neither generate http headers nor any 'framing'
html elements (like <html> and <body>). Also, all page content is now
wrapped in a <div id='cgit'> element to make it easier to select the
correct cgit classes when embedded/themed.
Suggested-by: Matt Sealey <matt@genesi-usa.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This teaches all diff-related operations (i.e. ui-log, ui-diff and ui-patch)
how to handle binary files.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The new 'max-stats' and 'repo.max-stats' settings makes it possible to
define the maximum statistics period, both globally and per repo. Hence,
it is now feasible to allow statistics on repositories with a high commit
frequency, like linux-2.6, by setting repo.max-stats to e.g. 'month'.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This new page, which is disabled by default, can be used to print some
statistics about the number of commits per period in the repository,
where period can be either weeks, months, quarters or years.
The function can be activated globally by setting 'enable-stats=1' in
cgitrc and disabled for individual repos by setting 'repo.enable-stats=0'.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
